Drip Irrigation Design and Installation

🌱 Drip Irrigation Design and Installation

📊 Drip Tape Specifications:

Parameter	Options
Emitter Spacing	15cm, 20cm, 30cm, 50cm
Flow Rate	0.5-2.0 L/hour per emitter
Wall Thickness	4-15 mil (thicker = longer life)
Diameter	16mm, 22mm, 35mm

📐 Design Calculations:

Example: 1 hectare tomato farm
- Row spacing: 1.5m
- Plant spacing: 0.5m
- Emitter spacing: 0.3m (one emitter per plant)
- Flow rate: 1.0 L/hour per emitter

Calculations:
Total plants = (100m / 1.5m) × (100m / 0.5m) = 13,333 plants
Total flow = 13,333 × 1.0 L/h = 13,333 L/h = 222 L/min
Required pump: 250 L/min at 2 bar pressure
Daily water need: 13,333 L (at 1 hour watering)

💡 Installation Tips:

Install filter and pressure regulator at water source
Lay main lines, flush before connecting emitters
Bury drip tape 5-10cm for longer life
Use flush valves at line ends to clean periodically
Check for leaks regularly

💡 Key Takeaways:

Apply these concepts directly to your farm or project.
Take notes on important details for the quiz.
Use the button below to track your progress.

← Previous Lesson 📝 Take Quiz →